Flame Retardant White PE Plastic Film for Construction Shrink Wrap

Basic Info.

Model NO.	9mil*40ft*100ft
Transparency	Opaque
Hardness	Soft
Processing Type	Blow Molding
Delivery	25days
Certification	ISO9001
Transport Package	Pallet Packaging
Specification	40cm*40cm*185cm
Trademark	Neutral Printing
Origin	Shandong, China
HS Code	39201090
Production Capacity	300PCS/Day

Packaging & Delivery

Package Size 200.00cm * 40.00cm * 40.00cm Package Gross Weight 120.000kg

Product Description

Description

LONGXING Flame Retardant Shrink Wrap is most commonly used for transportation protection of large equipment, weather resistant projects and important equipment. Our shrink wrap is widely used in weathering, painting and special coating operations for construction projects. This can prevent bad weather and control temperature and humidity so that the project can proceed as planned. 7-10mil wrap shrink film is cost effective and easy to install.
Additional information

• 7mil, 8mil, 9 mil, 10mil thick shrink wrap
  • The thickest flame retardant shrink wrap material available
  • Excellent for the largest scaffolding projects, open-air shipping containers, factory projects, containments, or government contracts
• 275º F shrink temperature
• Will not chafe, move or shift like a tarp
• 100% virgin resin material for uniform thickness
• Easy to ventilate to eliminate moisture and mildew
• Maximum UV inhibitors (5% by weight) guaranteed to block UV for one year
• Specialized additives will extinguish the wrap within FOUR seconds of the ignition source being removed
• Flame Retardant Material may be required for projects where people are working underneath or inside the shrink wrap

Shrink Wrap Warning

Shrink wrap can burn. If heat is applied incorrectly shrink wrap can ignite into open flame. It can also drop down onto other combustible material and cause secondary ignition and fire. If at any time you observe the shrink wrap on fire immediately stop what you are doing and carefully inspect the area where you are working for a possible fire. Keep a fire extinguisher available at all times.

Test	Method	Units	Value	Value	Value	Value
Thickness	ASTM D374	Mil (Um)	7	8	9	10
Weatherability	ASTM G53	Hours	1,000hous	1,000hours	1,000 hours	1,000 hours
Shrink Temperature	ASTM D2732	Deg. F	275	275	275	275
Tensile Properties
Yield (md)	ASTM D882	PSI	1400	1400	1400	1400
Yield (cd)		PSI	1250	1250	1250	1250
Break (md)	ASTM D882	PSI	3000	3000	2500	2500
Break (cd)		PSI	2500	2500	2400	2400
Elongation (md)	ASTM D882	%	650	650	600	600
Elongation (cd)		%	750	750	700	700
Elmendorf Tear (md)	ASTM D1922	Grams	1100	1200	1200	1700
Elmendorf Tear (cd)		Grams	1600	2050	2400	2500
Shrink rate (md)	ASTM D882	%	10	10	10	10
Shrink rate (cd)		%	55	55	55	55
Dart Impact	ASTM D1709	Grams	800	800	850	900
Longxing shrink wrap contain UV inhibitors and FR meet NFPA 701 method II testing

Hot size of shrink wrap	size in feet and mil
width x length x thickness
6mx30mx180mic	20ftx100ftx7mil
6mx60mx180mic	20ftx200ftx7mil
9mx30mx200mic	30ftx100ftx8mil
10mx30mx200mic	32ftx100ftx8mil
12mx30mx230mic	40ftx100ftx9mil
12mx45mx230mic	40ftx150ftx9mil
14mx30mx250mic	45ftx100ftx10mil
15mx30mx230mic	50ftx100ftx9mil
15mx30mx250mic	50ftx100ftx10mil